show file
3-38 Basic Configuration
Example
This example shows how to list all the configuration and image files in the system. The display
indicates which image file is the Active file and which image file is the Boot file that will be used
the next time the system reboots.
C3(su)->dir
Images:
==================================================================
Filename: c3-series_06.61.00.0029 (Active)
Version: 06.61.00.0029
Size: 9411584 (bytes)
Date: Fri Aug 1 06:55:23 2012
CheckSum: 6126a7aadfdf05150afb6eca51982302
Compatibility: <platform specific>
Filename: c3-series_06.61.00.0030 (Boot)
Version: 06.61.00.0030
Size: 9411584 (bytes)
Date: Fri Aug 8 08:44:04 2012
CheckSum: 627938b785fa7fdb8eed74672af1edcc
Compatibility: <platform specific>
Files: Size
================================ ========
configs:
Master 12509
Master2 10441
logs:
current.log 190481
secure:
Master 14577
secure/logs:
secure.log 256017
show file
Use this command to display the contents of a file.
Syntax
show file filename
Parameters
Defaults
None.
Mode
Switch command, read-only.
filename Specifies the name of the file to display.
To Next Page
Loading...
Need help?
General