Enterasys C3G124-24 User Manual

clear authentication login
Enterasys C3 Configuration Guide 32-5
Parameters
Defaults
If this command is not executed, the default login method is “any.”
Mode
Switch command, read-write, if security profile = normal.
Switch command, super-user, if security profile = c2
Example
This example shows how to set the authentication login method to use the local password settings:
C3(rw)->set authentication login local
clear authentication login
Use this command to reset the authentication login method to the default setting of “any”.
Syntax
clear authentication login
Parameters
None.
Defaults
None.
Mode
Switch command, read-write, if security profile = normal.
Switch command, super-user, if security profile = c2
Example
This example shows how to reset the authentication login method.
C3(rw)->clear authentication login
any Specifies that the authentication protocol will be selected using the
following precedence order:
•TACACS+
•RADIUS
•Local
local Specifies that the local network password settings will be used for
authentication login.
radius Specifies that RADIUS will be used for authentication login.
tacacs Specifies that TACACS+ will be used for authentication login.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English