Enterasys C3G124-24 User Manual

set pwa enhancedmode
32-88 Authentication and Authorization Configuration
set pwa enhancedmode
This command enables PWA URL redirection. The switch intercepts all HTTP packets on port 80
from the end user, and sends the end user a refresh page destined for the PWA IP Address
configured.
Syntax
set pwa enhancedmode {enable | disable}
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to enable PWA enhancedmode:
C3(su)->set pwa enhancedmode enable
enable | disable Enables or disables PWA enhancedmode.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English