Enterasys C3G124-24 - Set Ssh Hostkey

set ssh hostkey
32-90 Authentication and Authorization Configuration
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to disable SSH:
C3(su)->set ssh disable
set ssh hostkey
Use this command to reinitialize new SSH authentication keys.
Syntax
set ssh hostkey reinitialize
Parameters
Defaults
None
Mode
Switch command, read-write.
Example
This example shows how to regenerate SSH keys:
C3(su)->set ssh hostkey reinitialize
enabled | disabled Enables or disables SSH, or reinitializes the SSH server.
reinitialize Reinitializes the SSH server.
reinitialize Reinitializes the server host authentication keys.