show vlan
14-4 802.1Q VLAN Configuration
Example
This example shows how to display information for VLAN 1. In this case, VLAN 1 is named
“DEFAULT VLAN”. Ports allowed to transmit frames belonging to VLAN 1 are listed as egress
ports. Ports that won’t include a VLAN tag in their transmitted frames are listed as untagged
ports. There are no forbidden ports (prevented from transmitted frames) on VLAN 1:
C3(su)->show vlan 1
VLAN: 1 NAME: DEFAULT VLAN
VLAN Type: Default
Egress Ports
ge.1.1-10, ge.2.1-4, ge.3.1-7,
Forbidden Egress Ports
None.
Untagged Ports
ge.1.1-10, ge.2.1-4, ge.3.1-7,
Table 14-2 provides an explanation of the command output.
Table 14-2 show vlan Output Details
Output Field What It Displays...
VLAN VLAN ID.
NAME Name assigned to the VLAN.
Status Whether it is enabled or disabled.
VLAN Type Whether it is permanent (static) or dynamic.
Egress Ports Ports configured to transmit frames for this VLAN.
Forbidden Egress
Ports
Ports prevented from transmitting frames for this VLAN.
Untagged Ports Ports configured to transmit untagged frames for this VLAN.
To Next Page
Loading...
