Enterasys C3G124-24 - Clear Pwa Banner; Set Pwa Displaylogo

clear pwa banner
Enterasys C3 Configuration Guide 32-81
clear pwa banner
Use this command to reset the PWA login banner to a blank string.
Syntax
clear pwa banner
Parameters
None.
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to reset the PWA login banner to a blank string
C3(su)->clear pwa banner
set pwa displaylogo
Use this command to set the display options for the Enterasys Networks logo.
Syntax
set pwa displaylogo {display | hide}
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to hide the Enterasys Networks logo:
C3(su)->set pwa displaylogo hide
display | hide Displays or hides the Enterasys Networks logo when the PWA website
displays.