clear policy profile
Enterasys C3 Configuration Guide 15-5
Example
This example shows how to create a policy profile 1 named “netadmin” with PVID override
enabled for PVID 10, and Class-of-Service override enabled for CoS 5. This profile can use VLAN
10 for untagged egress:
C3(su)->set policy profile 1 name netadmin pvid-status enable pvid 10 cos-status
enable cos 5 untagged-vlans 10
clear policy profile
Use this command to delete a policy profile entry.
Syntax
clear policy profile profile-index
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to delete policy profile 8:
C3(su)->clear policy profile 8
profile-index Specifies the index number of the profile entry to be deleted. Valid values
are 1 to 255.
To Next Page
Loading...
