Enterasys C3G124-24 - Clear Summertime; Set Prompt

clear summertime
3-18 Basic Configuration
clear summertime
Use this command to clear the daylight savings time configuration.
Syntax
clear summertime
Parameters
None.
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to clear the daylight savings time configuration:
C3(su)->clear summertime
set prompt
Use this command to modify the command prompt.
Syntax
set prompt prompt_string
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to set the command prompt to Switch 1:
C3(su)->set prompt “Switch 1”
Switch 1(su)->
prompt_string Specifies a text string for the command prompt.
Note: A prompt string containing a space in the text must be enclosed in quotes as
shown in the example below.