show ipv6 neighbors
Enterasys C3 Configuration Guide 29-23
Examples
This example displays information about IPv6 interface VLAN 7.
C3(su)->router#show ipv6 interface vlan 7
Vlan 7 Administrative Mode Enabled
Vlan 7 IPv6 Routing Operational Mode Enabled
IPv6 is Enabled
IPv6 Prefix is FE80::211:88FF:FE55:4A7F/128
3FFE:501:FFFF:101:211:88FF:FE55:4A7F/64
3FFD::211:88FF:FE55:4A7F/64
Routing Mode Enabled
Interface Maximum Transmit Unit 1500
Router Duplicate Address Detection Transmits 1
Router Advertisement NS Interval 0
Router Lifetime Interval 1800
Router Advertisement Reachable Time 0
Router Advertisement Interval 600
Router Advertisement Managed Config Flag Enabled
Router Advertisement Other Config Flag Enabled
Router Advertisement Suppress Flag Disabled
This example displays information about IPv6 interface tunnel 1.
C3(su)->router>show ipv6 interface tunnel 1
Tunnel 1 Administrative Mode Enabled
Tunnel 1 IPv6 Routing Operational Mode Enabled
Mode for IPv6 Tunnel IPv6OVER4
Source Address for IPv6 Tunnel 192.168.1.2
Destination Address for IPv6 Tunnel 192.168.8.1
IPv6 is Enabled
IPv6 Prefix is FE80::A0C:102/128
2003::211:88FF:FE78:F818/64
Routing Mode Enabled
Interface Maximum Transmit Unit 1480
Router Duplicate Address Detection Transmits 1
Router Advertisement NS Interval 0
Router Advertised Lifetime 1800
Router Advertisement Reachable Time 0
Router Advertisement Min Interval 200
Router Advertisement Max Interval 600
Router Advertisement Managed Config Flag Disabled
Router Advertisement Other Config Flag Disabled
Router Advertisement Suppress Flag Disabled
show ipv6 neighbors
This command displays IPv6 Neighbor Cache information.
Syntax
show ipv6 neighbors
Parameters
None.
To Next Page
Loading...
