clear cos all-entries
15-36 Policy Classification Configuration
Port Type Type Unit Maximum Rate Minimum Rate Granularity
--------- ---- ---- ------------ ------------ -----------
0 irl Kbps 1000000 64 1
This examples shows flood control unit information.
C3(su)->show cos unit flood-ctrl
Type: Unit:
flood-ctrl = flood control type pps = packets per second
Port Type Type Unit Maximum Rate Minimum Rate Granularity
----------- ----------- ---- ------------ ------------ -----------
0 flood-ctrl pps 148810 0 1
clear cos all-entries
Use this command to clear all Class of Service entries except entries 0-7.
Syntax
clear cos all-entries
Parameters
None.
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to clear the CoS configuration for all entries except entries 0-7:
C3(su)->clear cos all-entries
show cos port-type
Use this command to display Class of Service port type configurations.
Syntax
show cos port-type [irl [port-type]] [flood-ctrl [port-type]]
Parameters
irl (Optional) Displays inbound rate limiting information.
flood-ctrl (Optional) Displays flood control information.
port-type (Optional) Displays information for a specific port type. (Only port type
0 is supported.)
To Next Page
Loading...
Need help?
General