show cos port-type
Enterasys C3 Configuration Guide 15-37
Defaults
If no parameters are specified, inbound rate limiting and flood control information for all port
types is displayed.
Mode
Switch command, read-only.
Usage
The C3 implementation provides one default port type (0) for designating available inbound rate
limiting or flood control resources. Port type 0 includes all ports.
The port type 0 IRL description is “C3 100 IRL,” which indicates that this port type provides a
maximum of 100 inbound rate limiting resources per port group. The port type 0 flood control
description is “C3 3 flood-ctrl” which indicates that this port type provides a maximum of 3 flood
control resources per port group.
Examples
This example shows inbound rate limiting information for port type 0.
C3(su)->show cos port-type irl 0
Number of resources: Supported rate types:
irl = inbound rate limiter(s) Kbps = kilobits per second
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ----------------- -----------------
0 C3 100 IRL 100 kbps ge.1.1-48 ge.1.1-4
This example shows flood control information for port type 0.
C3(su)->show cos port-type flood-ctrl 0
Number of resources: Supported rate types:
flood-ctrl = flood control type Pps = Packets per second
Port type Number of Supported Eligible Unselected
Index description limiters rate type ports ports
----- ------------ --------- --------- ---------------- ------------
0 C3 3 flood-ctrl 3 pps ge.1.1-24 ge.1.1-24
To Next Page
Loading...
