Enterasys C3G124-24 User Manual

clear snmp notify
Enterasys C3 Configuration Guide 12-31
Example
This example shows how to set an SNMP notify configuration with a notify name of “hello” and a
notify tag of “world”. Notifications will be sent as trap messages and storage type will
automatically default to permanent:
C3(su)->set snmp notify hello tag world trap
clear snmp notify
Use this command to clear an SNMP notify configuration.
Syntax
clear snmp notify notify
Parameters
Defaults
None.
Mode
Switch mode, read-write, when security profile = normal.
Switch mode, super-user, when security profile = C2.
Example
This example shows how to clear the SNMP notify configuration for “hello”:
C3(su)->clear snmp notify hello
show snmp notifyfilter
Use this command to display SNMP notify filter information, identifying which profiles will not
receive SNMP notifications.
Syntax
show snmp notifyfilter [profile] [subtree oid-or-mibobject] [volatile |
nonvolatile | read-only]
Parameters
notify Specifies an SNMP notify name to clear.
profile (Optional) Displays a specific notify filter.
subtree oid-or-
mibobject
(Optional) Displays a notify filter within a specific subtree.
volatile |
nonvolatile | read-
only
(Optional) Displays notify filter entries of a specific storage type.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English