set macauthentication reauthentication
32-36 Authentication and Authorization Configuration
Mode
Switch command, read-write.
Defaults
None.
Example
This example shows how to force the MAC authentication session for address 00-60-97-b5-4c-07
to re-initialize:
C3(su)->set macauthentication macinitialize 00-60-97-b5-4c-07
set macauthentication reauthentication
Use this command to enable or disable reauthentication of all currently authenticated MAC
addresses on one or more ports.
Syntax
set macauthentication reauthentication {enable | disable} port-string
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example shows how to enable MAC reauthentication on ge.4.1 though 5:
C3(su)->set macauthentication reauthentication enable ge.4.1-5
set macauthentication portreauthenticate
Use this command to force an immediate reauthentication of the currently active sessions on one
or more MAC authentication ports.
Syntax
set macauthentication portreauthenticate port-string
enable | disable Enables or disables MAC reauthentication.
port-string Specifies port(s) on which to enable or disable MAC reauthentication. For a
detailed description of possible port-string values, refer to “Port String
Syntax Used in the CLI” on page 11-1.
To Next Page
Loading...
