Enterasys C3G124-24 User Manual

set dhcp pool dns-server
22-24 DHCP Server Configuration
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example removes the default router from the address pool “auto1.”
C3(rw)->clear dhcp pool auto1 default-router
set dhcp pool dns-server
Use this command to specify one or more DNS servers for the DHCP clients served by the address
pool being configured. Up to 8 DNS servers can be configured.
Syntax
set dhcp pool poolname dns-server address [address2 ... address8]
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example assigns a DNS server at 10.14.10.1 to the address pool “‘auto1.”
C3(rw)->set dhcp pool auto1 dns-server 10.14.10.1
clear dhcp pool dns-server
Use this command to remove the DNS server list from the address pool being configured.
Syntax
clear dhcp pool poolname dns-server
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.
poolname Specifies the name of the address pool. Pool names may be up to 31
characters in length.
address Specifies the IP address of a DNS server.
address2 ... address8 (Optional) Specifies, in order of preference, up to 7 additional DNS
server addresses.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English