Enterasys C3G124-24 - Show Policy Capability; Show Policy Rule Output Details

show policy capability
15-8 Policy Classification Configuration
|admin|Port |ge.1.2 |16|ge.1.2 | A|NV| | 1|?|
|admin|Port |ge.1.3 |16|ge.1.3 | A|NV| | 1|?|
|admin|Port |ge.1.4 |16|ge.1.4 | A|NV| | 1|?|
|admin|Port |ge.1.5 |16|ge.1.5 | A|NV| | 1|?|
|admin|Port |ge.1.6 |16|ge.1.6 | A|NV| | 1|?|
|admin|Port |ge.1.7 |16|ge.1.7 | A|NV| | 1|?|
|admin|Port |ge.1.8 |16|ge.1.8 | A|NV| | 1|?|
|admin|Port |ge.1.9 |16|ge.1.9 | A|NV| | 1|?|
|admin|Port |ge.1.10 |16|ge.1.10 | A|NV| | 1|?|
|admin|Port |ge.1.11 |16|ge.1.11 | A|NV| | 1|?|
|admin|Port |ge.1.12 |16|ge.1.12 | A|NV| | 1|?|
Table 15-2 provides an explanation of the command output.
show policy capability
Use this command to display detailed policy classification capabilities supported by your
Enterasys C3 device.
Syntax
show policy capability
Parameters
None.
Defaults
None.
Table 15-2 show policy rule Output Details
Output Field What It Displays...
PID Profile index number. Assigned to this classification rule with the set policy profile
command (“set policy profile” on page 15-3).
Rule Type Type of classification rule. Refer to Table 15-3 for valid types.
Rule Data Rule data value. Refer to Table 15-3 for valid values for each classification type.
Mk Rule data mask. Refer to Table 15-3 for valid values for each classification data
value.
PortStr Ingress port(s) to which this rule applies.
RS Whether or not the status of this rule is active (A), not in service or not ready.
ST Whether or not this rule’s storage type is non-volatile (NV) or volatile (V).
VLAN VLAN ID to which this rule applies and whether or not matching packets will be
dropped or forwarded.
CoS If applicable, Class of Service value to which this rule applies.
U Whether or not this rule has been used.
dPID Whether or not this is a dynamic profile ID.
aPID Whether or not this is an administrative profile ID.