show dhcp server statistics
22-10 DHCP Server Configuration
Mode
Switch command, read-write.
Usage
This command clears only dynamic (automatic) DHCP bindings. Use the command clear dhcp
pool host to clear manually configured DHCP bindings.
Example
This example deletes the dynamic DHCP address binding for IP address 192.168.1.1.
C3(rw)->clear dhcp binding 192.168.1.1
show dhcp server statistics
Use this command to display DHCP server statistics.
Syntax
show dhcp server statistics
Parameters
None.
Defaults
None.
Mode
Read-only.
Example
This example displays server statistics.
C3(ro)->show dhcp server statistics
Automatic Bindings 36
Expired Bindings 6
Malformed Bindings 0
Messages Received
---------- ----------
DHCP DISCOVER 382
DHCP REQUEST 3855
DHCP DECLINE 0
DHCP RELEASE 67
DHCP INFORM 1
Messages Sent
---------- ------
DHCP OFFER 381
DHCP ACK 727
DHCP NACK 2
To Next Page
Loading...
Need help?
General