Enterasys C3G124-24 - Clear Lldp Port Location-Info; Clear Lldp Port Network-Policy

clear lldp port location-info
Enterasys C3 Configuration Guide 10-33
Defaults
None.
Mode
Switch command, read-write.
Example
This example returns port ge.1.1 to the default LLDP-MED trap state of disabled.
C3(rw)->clear lldp port med-trap ge.1.1
clear lldp port location-info
Use this command to return the port ECS ELIN location setting to the default value of null.
Syntax
clear lldp port location-info elin port-string
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example returns the location information ELIN value on port ge.1.1 to the default value of
null.
C3(rw)->clear lldp port location-info elin ge.1.1
clear lldp port network-policy
Use this command to return LLDP network policy for a set of applications on a port or range of
ports to default values.
Syntax
clear lldp port network-policy {all | voice | voice-signaling | guest-voice |
guest-voice-signaling | softphone-voice | video-conferencing | streaming-video |
video-signaling} {[state] [tag] [vid] [cos] [dscp]} port-string
Parameters
elin Specifies that the ECS ELIN location information value should be
cleared.
port-string Specifies the port or range of ports to be affected.
all Applies command to all applications.