show ip address
Enterasys C3 Configuration Guide 3-3
show ip address
Use this command to display the system IP address and subnet mask.
Syntax
show ip address
Parameters
None.
Defaults
None.
set system temperature 3-12
clear system temperature 3-13
show time 3-14
set time 3-14
show summertime 3-15
set summertime 3-16
set summertime date 3-16
set summertime recurring 3-17
clear summertime 3-18
set prompt 3-18
show banner 3-19
set banner 3-19
clear banner 3-20
show version 3-21
set system name 3-22
set system location 3-22
set system contact 3-23
set width 3-23
set length 3-24
show logout 3-24
set logout 3-25
show console 3-25
set console baud 3-26
set console vt100 3-26
For information about... Refer to page...
To Next Page
Loading...
