Enterasys C3G124-24 User Manual

area stub no-summary
Enterasys C3 Configuration Guide 31-17
Parameters
Defaults
None.
Mode
Router OSPFv3 configuration: C3(su)->router(Config-router)#
Usage
A stub area is characterized by the fact that AS external LSAs are not propagated into the area.
Removing AS external LSAs and summary LSAs can significantly reduce the link state database of
routers within the stub area.
Use the no form of the command to delete a stub area.
Example
This example creates a stub area with the ID of 30.
C3(su)->router(Config-router)# area 30 stub
area stub no-summary
This command disables the import of summary LSAs into the specified stub area.
Syntax
area areaid stub no-summary
no area areaid stub no-summary
Parameters
Defaults
None.
Mode
Router OSPFv3 configuration: C3(su)->router(Config-router)#
Usage
Use the no form of this command to set the summary LSA import mode to the default for the
specified stub area.
Example
The example disables the import of summary LSAs into stub area 30.
C3(su)->router(Config-router)# area 30 stub no-summary
areaid Specifies the area ID in IP address format (dotted-quad) or as a decimal
value.
areaid Specifies the area ID in IP address format (dotted-quad) or as a decimal
value.

Enterasys C3G124-24 Specifications

General

Brand	Enterasys
Model	C3G124-24
Category	Switch
Language	English