Enterasys C3G124-24 - Clear Lldp Port Trap; Clear Lldp Port Med-Trap

clear lldp port trap
10-32 Discovery Protocol Configuration
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example returns port ge.1.1 to the default state of enabled for both transmitting and
processing received LLDPDUs.
C3(rw)->clear lldp port status ge.1.1
clear lldp port trap
Use this command to return the port LLDP trap setting to the default value of disabled.
Syntax
clear lldp port trap port-string
Parameters
Defaults
None.
Mode
Switch command, read-write.
Example
This example returns port ge.1.1 to the default LLDP trap state of disabled.
C3(rw)->clear lldp port trap ge.1.1
clear lldp port med-trap
Use this command to return the port LLDP-MED trap setting to the default value of disabled.
Syntax
clear lldp port med-trap port-string
Parameters
port-string Specifies the port or range of ports to be affected.
port-string Specifies the port or range of ports to be affected.
port-string Specifies the port or range of ports to be affected.