reset in
3-48 Basic Configuration
Syntax
reset at hh:mm [mm/dd] [reason]
Parameters
Defaults
If month and day are not specified, the reset will be scheduled for the first occurrence of the
specified time.
If a reason is not specified, none will be applied..
Mode
Switch command, read-write.
Example
This example shows how to schedule a reset at 11 p.m. on November 14, with a reason of
“testing.”
C3(su)->reset at 23:00 11/14 testing
Reset scheduled at 23:00:00, MON NOV 14 2011
Reset reason: testing
Proceed with scheduled reset? (y/n) [n]? y
Reset scheduled for 23:00:00, MON NOV 14 2011 (in 0 days 5 hours 58 minutes)
reset in
Use this command to schedule a system reset after a specific time. This feature is useful for
loading a new boot image.
Syntax
reset in hh:mm [reason]
Parameters
Defaults
If a reason is not specified, none will be applied.
Mode
Switch command, read-write.
hh:mm Schedules the hour and minute of the reset using the 24-hour system.
mm/dd (Optional) Schedules the month and day of the reset.
reason (Optional) Specifies a text string that indicates the reason for the reset.
hh:mm Specifies the number of hours and minutesinto the future to perform the
reset.
reason (Optional) Specifies a text string that indicates the reason for the reset.
To Next Page
Loading...
Need help?
General