Enterasys C3G124-24 - Configuring Spanning Tree Loop Protect Parameters; Commands; Purpose

Configuring Spanning Tree Loop Protect Parameters
Enterasys C3 Configuration Guide 13-45
Configuring Spanning Tree Loop Protect Parameters
Purpose
To display and set Spanning Tree Loop Protect parameters, including the global parameters of
Loop Protect threshold, window, enabling traps, and disputed BPDU threshold, as well as per port
and port/SID parameters. See “Loop Protect” on page 13-2 for more information about the Loop
Protect feature.
Commands
For information about... Refer to page...
set spantree lp 13-46
show spantree lp 13-46
clear spantree lp 13-47
show spantree lplock 13-47
clear spantree lplock 13-48
set spantree lpcapablepartner 13-49
show spantree lpcapablepartner 13-49
clear spantree lpcapablepartner 13-50
set spantree lpthreshold 13-50
show spantree lpthreshold 13-51
clear spantree lpthreshold 13-51
set spantree lpwindow 13-52
show spantree lpwindow 13-52
clear spantree lpwindow 13-53
set spantree lptrapenable 13-53
show spantree lptrapenable 13-54
clear spantree lptrapenable 13-54
set spantree disputedbpduthreshold 13-55
show spantree disputedbpduthreshold 13-56
clear spantree disputedbpduthreshold 13-56
show spantree nonforwardingreason 13-57