show ip pimsm neighbor
Enterasys C3 Configuration Guide 27-43
Hello Interval (secs) 30 secs
CBSR Preference -1
CRP Preference -1
CBSR Hash Mask Length 30
Table 27-9 provides an explanation of the show ip pimsm interface vlan command output.
This example shows how to display PIM interface statistics.
.
C3(su)->router> show ip pimsm interface stats all
Neighbor
Vlan ID IP Address Subnet Mask Designated Router count
--------- --------------- --------------- ----------------- ----------
6 192.168.6.2 255.255.255.0 0.0.0.0 0
7 192.168.7.1 255.255.255.0 192.168.7.1 0
8 192.168.8.1 255.255.255.0 0.0.0.0 0
30 192.168.30.1 255.255.255.0 192.168.30.2 1
Table 27-10 provides an explanation of the show ip pimsm interface stats command output.
show ip pimsm neighbor
Display the router’s PIM neighbors.
Syntax
show ip pimsm neighbor [vlan-id]
Table 27-9 show ip pimsm interface vlan Output Details
Output Field What it displays
IP Address The IP address of the specified interface.
Subnet Mask The Subnet Mask for the IP address of the PIM interface.
Mode Indicates whether PIM-SM is enabled or disabled on the specified interface. This is a
configured value. By default it is disabled.
Hello Interval Indicates the frequency at which PIM hello messages are transmitted on this
interface. This is a configured value. By default, the value is 30 seconds
CBSR Preference The preference value for the local interface as a candidate bootstrap router.
CRP Preference The preference value as a candidate rendezvous point on this interface.
CBSR Hash Mask
Length
The hash mask length to be advertised in bootstrap messages if this interface is
elected as the bootstrap router. The value is used in the hash algorithm for selecting
the RP for a particular group.
Table 27-10 show ip pimsm interface stats Output Details
Output Field What it displays
IP Address The IP Address that represents the PIM-SM interface.
Subnet Mask The Subnet Mask of this PIM-SM interface.
Designated Router IP Address of the Designated Router for this interface.
Neighbor Count The number of neighbors on the PIM-SM interface.
To Next Page
Loading...
Need help?
General