Enterasys C3G124-24 - Show Version; Show Version Output Details

show version
Enterasys C3 Configuration Guide 3-21
Mode
Switch command, read-write.
Example
This example shows how to clear the message of the day banner to a blank string:
C3(rw)->clear banner motd
show version
Use this command to display hardware and firmware information. Refer to “Downloading a
Firmware Image” on page 3-27 for instructions on how to download a firmware image.
Syntax
show version
Parameters
None.
Defaults
None.
Mode
Switch command, read-only.
Example
This example shows how to display version information. Please note that you may see different
information displayed, depending on the type of hardware.
C3(su)->show version
Model Serial # Versions
-------------- ----------------- -------------------
C3G124-48P 001188021035 Hw:BCM5665 REV 17
Bp:01.00.29
Fw:6.61.xx.xxxx
BuFw:03.01.13
PoE:500_3
Table 3-4 provides an explanation of the command output.
Table 3-4 show version Output Details
Output Field What It Displays...
Model Switch’s model number.