show txqmonitor port Transmit Queue Monitoring Configuration
Enterasys C3 Configuration Guide 9-7
Mode
Switch mode, read-only.
Usage
This command displays transmit queue monitoring information about ports, including:
• Status — whether the port is operating normally, or ignoring received pause frames, or
disabled due to transmit queue monitoring corrective action
• Transmit queue sampling counts — the number of consecutive samples showing stalled
transmit queues, and the total number of samples showing stalled queues.
Examples
This example displays transmit queue monitoring information for ports 1 through 3. The output
shows that port ge.1.2 is currently ignoring received pause frames and port ge.1.3 is disabled due
to 10 consecutive monitoring samples showing a stalled transmit queue.
C3(su)->show txqmonitor port ge.1.1-3
port status consecutive total
samples stalled samples stalled
-------- -------- ----------------- ------------------
ge.1.1 normal 0 0
ge.1.2 ignorepause 0 5
ge.1.3 down 10 10
To Next Page
Loading...
