Keysight Technologies InfiniiVision 3000T X Series

To Next Page

To Previous Page

:TIMebase Commands 32

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1003

:TIMebase:WINDow:POSition

(see page 1276)

Command Syntax

:TIMebase:WINDow:POSition <pos value>

<pos value> ::= time from the trigger event to the zoomed (delayed)

view reference point in NR3 format

The :TIMebase:WINDow:POSition command sets the horizontal position in the

zoomed (delayed) view of the main sweep. The main sweep range and the main

sweep horizontal position determine the range for this command. The value for

this command must keep the zoomed view window within the main sweep range.

Query Syntax

:TIMebase:WINDow:POSition?

The :TIMebase:WINDow:POSition? query returns the current horizontal window

position setting in the zoomed view.

Return Format

<value> ::= position value in seconds

See Also • "Introduction to :TIMebase Commands" on page 996

• ":TIMebase:MODE" on page 997

• ":TIMebase:POSition" on page 998

• ":TIMebase:RANGe" on page 999

• ":TIMebase:SCALe" on page 1001

• ":TIMebase:WINDow:RANGe" on page 1004

• ":TIMebase:WINDow:SCALe" on page 1005

Keysight Technologies InfiniiVision 3000T X Series - :TIMebase:WINDow:POSition