Keysight Technologies InfiniiVision 3000T X Series User Manual

318 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
14 :DISPlay Commands
:DISPlay:ANNotation<n>
(see page 1276)
Command Syntax
:DISPlay:ANNotation<n> <setting>
<setting> ::= {{1 | ON} | {0 | OFF}}
<n> ::= an integer from 1 to 4 in NR1 format.
The :DISPlay:ANNotation<n> command turns the annotation on and off. When on,
the annotation appears in the upper left corner of the oscilloscope's display.
The annotation is useful for documentation purposes, to add notes before
capturing screens.
Query Syntax
:DISPlay:ANNotation<n>?
The :DISPlay:ANNotation<n>? query returns the annotation setting.
Return Format
<value><NL>
<value> ::= {0 | 1}
See Also • ":DISPlay:ANNotation<n>:TEXT" on page 321
• ":DISPlay:ANNotation<n>:COLor" on page 320
• ":DISPlay:ANNotation<n>:BACKground" on page 319
• ":DISPlay:ANNotation<n>:X1Position" on page 322
• ":DISPlay:ANNotation<n>:Y1Position" on page 323
• "Introduction to :DISPlay Commands" on page 316

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English