Keysight Technologies InfiniiVision 3000T X Series - :SEARch:SERial:FLEXray Commands

936 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:SERial:FLEXray Commands
Table 126 :SEARch:SERial:FLEXray Commands Summary
Command Query Options and Query Returns
:SEARch:SERial:FLEXra
y:CYCLe <cycle> (see
page 937)
:SEARch:SERial:FLEXra
y:CYCLe? (see
page 937)
<cycle> ::= {ALL | <cycle #>}
<cycle #> ::= integer from 0-63
:SEARch:SERial:FLEXra
y:DATA <string> (see
page 938)
:SEARch:SERial:FLEXra
y:DATA? (see page 938)
<string> ::= "0xnn...n" where n
::= {0,..,9 | A,..,F | X }
:SEARch:SERial:FLEXra
y:DATA:LENGth
<length> (see
page 939)
:SEARch:SERial:FLEXra
y:DATA:LENGth? (see
page 939)
<length> ::= integer from 1 to 12
in NR1 format
:SEARch:SERial:FLEXra
y:FRAMe <frame id>
(see page 940)
:SEARch:SERial:FLEXra
y:FRAMe? (see
page 940)
<frame_id> ::= {ALL | <frame #>}
<frame #> ::= integer from 1-2047
:SEARch:SERial:FLEXra
y:MODE <value> (see
page 941)
:SEARch:SERial:FLEXra
y:MODE? (see page 941)
<value> := {FRAMe | CYCLe | DATA
| HERRor | FERRor | AERRor}