Keysight Technologies InfiniiVision 3000T X Series User Manual

:WGEN<w> Commands 35
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1149
:WGEN<w>:MODulation:FSKey:RATE
(see page 1276)
Command Syntax
:WGEN<w>:MODulation:FSKey:RATE <rate>
<w> ::= 1 in NR1 format
<rate> ::= FSK modulation rate in Hz in NR3 format
The :WGEN<w>:MODulation:FSKey:RATE command specifies the rate at which the
output frequency "shifts".
The FSK rate specifies a digital square wave modulating signal.
Query Syntax
:WGEN<w>:MODulation:FSKey:RATE?
The :WGEN<w>:MODulation:FSKey:RATE? query returns the FSK rate setting.
Return Format
<rate><NL>
<rate> ::= FSK modulation rate in Hz in NR3 format
See Also • ":WGEN<w>:MODulation:AM:DEPTh" on page 1144
• ":WGEN<w>:MODulation:AM:FREQuency" on page 1145
• ":WGEN<w>:MODulation:FM:DEViation" on page 1146
• ":WGEN<w>:MODulation:FM:FREQuency" on page 1147
• ":WGEN<w>:MODulation:FSKey:FREQuency" on page 1148
• ":WGEN<w>:MODulation:FUNCtion" on page 1150
• ":WGEN<w>:MODulation:FUNCtion:RAMP:SYMMetry" on page 1151
• ":WGEN<w>:MODulation:STATe" on page 1153
• ":WGEN<w>:MODulation:TYPE" on page 1154

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English