Keysight Technologies InfiniiVision 3000T X Series - :HARDcopy:NETWork:SLOT

:HARDcopy Commands 19
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 415
:HARDcopy:NETWork:SLOT
(see page 1276)
Command Syntax
:HARDcopy:NETWork:SLOT <slot>
<slot> ::= {NET0 | NET1}
The :HARDcopy:NETWork:SLOT command selects the network printer slot used
for the address and apply commands. There are two network printer slots to
choose from.
Query Syntax
:HARDcopy:NETWork:SLOT?
The :HARDcopy:NETWork:SLOT? query returns the currently selected network
printer slot.
Return Format
<slot><NL>
<slot> ::= {NET0 | NET1}
See Also • "Introduction to :HARDcopy Commands" on page 404
• ":HARDcopy:NETWork:APPLy" on page 412
• ":HARDcopy:NETWork:ADDRess" on page 411
• ":HARDcopy:NETWork:DOMain" on page 413
• ":HARDcopy:NETWork:USERname" on page 416
• ":HARDcopy:NETWork:PASSword" on page 414