:FUNCtion<m> Commands 18
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 377
:FUNCtion<m>:DISPlay
(see page 1276)
Command Syntax
:FUNCtion<m>:DISPlay <display>
<m> ::= 1 to (# math functions) in NR1 format
<display> ::= {{1 | ON} | {0 | OFF}}
The :FUNCtion<m>:DISPlay command turns the display of the function on or off.
When ON is selected, the function performs as specified using the other FUNCtion
commands. When OFF is selected, function is neither calculated nor displayed.
Query Syntax
:FUNCtion<m>:DISPlay?
The :FUNCtion<m>:DISPlay? query returns whether the function display is on or
off.
Return Format
<display><NL>
<display> ::= {1 | 0}
See Also • "Introduction to :FUNCtion<m> Commands" on page 368
• ":VIEW" on page 230
• ":BLANk" on page 202
• ":STATus" on page 227
To Next Page
Loading...
