Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:A429:COUNt:RESet

:SBUS<n> Commands 29
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 707
:SBUS<n>:A429:COUNt:RESet
(see page 1276)
Command Syntax
:SBUS<n>:A429:COUNt:RESet
Resets the word and error counters.
Errors • "-241, Hardware missing" on page 1235
See Also • ":SBUS<n>:A429:COUNt:WORD" on page 708
• ":SBUS<n>:A429:COUNt:ERRor" on page 706
• "Introduction to :SBUS<n> Commands" on page 697
• ":SBUS<n>:MODE" on page 701
• ":SBUS<n>:A429 Commands" on page 702