Keysight Technologies InfiniiVision 3000T X Series - :FFT:RANGe

354 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
17 :FFT Commands
:FFT:RANGe
(see page 1276)
Command Syntax
:FFT:RANGe <range>
<range> ::= the full-scale vertical axis value in NR3 format.
The :FFT:RANGe command defines the full-scale vertical axis for the FFT function.
Query Syntax
:FFT:RANGe?
The :FFT:RANGe? query returns the current full-scale range value for the FFT
function.
Return Format
<range><NL>
<range> ::= the full-scale vertical axis value in NR3 format.
See Also • ":FFT:AVERage:COUNt" on page 347
• ":FFT:CENTer" on page 348
• ":FFT:CLEar" on page 349
• ":FFT:DISPlay" on page 350
• ":FFT:DMODe" on page 351
• ":FFT:OFFSet" on page 353
• ":FFT:REFerence" on page 355
• ":FFT:SCALe" on page 356
• ":FFT:SOURce1" on page 357
• ":FFT:SPAN" on page 358
• ":FFT:STARt" on page 359
• ":FFT:STOP" on page 360
• ":FFT:VTYPe" on page 361
• ":FFT:WINDow" on page 362