984 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
31 :SYSTem Commands
:SYSTem:LOCK
(see page 1276)
Command Syntax
:SYSTem:LOCK <on_off>
<on_off> ::= {{1 | ON} | {0 | OFF}}
The :SYSTem:LOCK command disables the front panel. LOCK ON is the equivalent
of sending a local lockout message over the programming interface.
Query Syntax
:SYSTem:LOCK?
The :SYSTem:LOCK? query returns the lock status of the front panel.
Return Format
<on_off><NL>
<on_off> ::= {1 | 0}
See Also • "Introduction to :SYSTem Commands" on page 980