:MTESt Commands 24
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 581
:MTESt:SOURce
(see page 1276)
Command Syntax
:MTESt:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :MTESt:SOURce command selects the channel which is configured by the
commands contained in a mask file when it is loaded.
Query Syntax
:MTESt:SOURce?
The :MTESt:SOURce? query returns the channel which is configured by the
commands contained in the current mask file.
Return Format
<source><NL>
<source> ::= {CHAN<n> | NONE}
<n> ::= 1 to (# analog channels) in NR1 format
See Also • "Introduction to :MTESt Commands" on page 551
• ":MTESt:AMASk:SOURce" on page 556
To Next Page
Loading...
