Keysight Technologies InfiniiVision 3000T X Series - *TRG (Trigger)

188 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
5 Common (*) Commands
*TRG (Trigger)
(see page 1276)
Command Syntax
*TRG
The *TRG command has the same effect as the :DIGitize command with no
parameters.
See Also • "Introduction to Common (*) Commands" on page 168
• ":DIGitize" on page 203
• ":RUN" on page 224
• ":STOP" on page 228