Keysight Technologies InfiniiVision 3000T X Series - :DVM Commands

333
Keysight InfiniiVision 3000T X-Series Oscilloscopes
Programmer's Guide
15 :DVM Commands
When the optional DSOXDVM digital voltmeter analysis feature is licensed, these
commands control the digital voltmeter (DVM) feature.
Table 93 :DVM Commands Summary
Command Query Options and Query Returns
:DVM:ARANge {{0 |
OFF} | {1 | ON}} (see
page 334)
:DVM:ARANge? (see
page 334)
{0 | 1}
n/a :DVM:CURRent? (see
page 335)
<dvm_value> ::= floating-point
number in NR3 format
:DVM:ENABle {{0 |
OFF} | {1 | ON}} (see
page 336)
:DVM:ENABle? (see
page 336)
{0 | 1}
:DVM:MODE <mode> (see
page 337)
:DVM:MODE? (see
page 337)
<dvm_mode> ::= {ACRMs | DC |
DCRMs}
:DVM:SOURce <source>
(see page 338)
:DVM:SOURce? (see
page 338)
<source> ::= {CHANnel<n>}
<n> ::= 1-2 or 1-4 in NR1 format