Keysight Technologies InfiniiVision 3000T X Series

To Next Page

To Previous Page

:POWer Commands 26

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 613

:POWer:MODulation:TYPE

(see page 1276)

Command Syntax

:POWer:MODulation:TYPE <modulation>

<modulation> ::= {VAVerage | ACRMs | VRATio | PERiod | FREQuency

| PWIDith | NWIDth | DUTYcycle | RISetime | FALLtime}

The :POWer:MODulation:TYPE command selects the type of measurement to

make in the modulation analysis:

•VAVerage

•ACRMs

•VRATio

•PERiod

•FREQuency

• PWIDth (positive pulse width)

• NWIDth (negative pulse width)

•DUTYcycle

•RISetime

•FALLtime

Query Syntax

:POWer:MODulation:TYPE?

The :POWer:MODulation:TYPE query returns the modulation type setting.

Return Format

<modulation> ::= {VAV | ACRM | VRAT | PER | FREQ | PWID | NWID | DUTY

| RIS | FALL}

See Also • ":POWer:MODulation:SOURce" on page 612

• ":POWer:MODulation:APPLy" on page 611

• ":MEASure:VAVerage" on page 512

• ":MEASure:VRMS" on page 518

• ":MEASure:VRATio" on page 517

• ":MEASure:PERiod" on page 488

• ":MEASure:FREQuency" on page 480

• ":MEASure:PWIDth" on page 492

• ":MEASure:NWIDth" on page 484

• ":MEASure:DUTYcycle" on page 478

• ":MEASure:RISetime" on page 496

• ":MEASure:FALLtime" on page 479

Keysight Technologies InfiniiVision 3000T X Series - :POWer:MODulation:TYPE