To Next Page

To Previous Page

:FFT Commands 17

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 357

:FFT:SOURce1

(see page 1276)

Command Syntax

:FFT:SOURce1 <offset>

<source> ::= {CHANnel<n> | FUNCtion<c> | MATH<c>}

<n> ::= 1 to (# analog channels) in NR1 format.

<c> ::= {1 | 2}

The :FFT:SOURce1 command selects the source for the FFT function.

Query Syntax

:FFT:SOURce1?

The :FUNCtion<m>:SOURce1? query returns the current source1 for the FFT

function.

Return Format

<source> ::= {CHANnel<n> | FUNCtion<c> | MATH<c>}

<n> ::= 1 to (# analog channels) in NR1 format.

<c> ::= {1 | 2}

See Also • ":FFT:AVERage:COUNt" on page 347

• ":FFT:CENTer" on page 348

• ":FFT:CLEar" on page 349

• ":FFT:DISPlay" on page 350

• ":FFT:DMODe" on page 351

• ":FFT:OFFSet" on page 353

• ":FFT:RANGe" on page 354

• ":FFT:REFerence" on page 355

• ":FFT:SCALe" on page 356

• ":FFT:SPAN" on page 358

• ":FFT:STARt" on page 359

• ":FFT:STOP" on page 360

• ":FFT:VTYPe" on page 361

• ":FFT:WINDow" on page 362

NOTE

Another shorthand notation for SOURce1 in this command/query (besides SOUR1) is SOUR.

Keysight Technologies InfiniiVision 3000T X Series User Manual

Questions and Answers: