904 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:GLITch:SOURce
(see page 1276)
Command Syntax
:SEARch:GLITch:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:GLITch:SOURce command selects the channel on which to search for
glitches (pulse widths).
Query Syntax
:SEARch:GLITch:SOURce?
The :SEARch:GLITch:SOURce? query returns the current pulse width source.
If all channels are off, the query returns "NONE."
Return Format
<source><NL>
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:MODE" on page 893
• ":SEARch:GLITch:POLarity" on page 901
• ":SEARch:GLITch:QUALifier" on page 902
• ":SEARch:GLITch:RANGe" on page 903
To Next Page
Loading...
