Keysight Technologies InfiniiVision 3000T X Series - :SEARch Commands

889
Keysight InfiniiVision 3000T X-Series Oscilloscopes
Programmer's Guide
30 :SEARch Commands
Control the event search modes and parameters for each search type. See:
• "General :SEARch Commands" on page 890
• ":SEARch:EDGE Commands" on page 895
• ":SEARch:GLITch Commands" on page 898 (Pulse Width search)
• ":SEARch:PEAK Commands" on page 905
• ":SEARch:RUNT Commands" on page 910
• ":SEARch:TRANsition Commands" on page 915
• ":SEARch:SERial:A429 Commands" on page 920
• ":SEARch:SERial:CAN Commands" on page 926
• ":SEARch:SERial:FLEXray Commands" on page 936
• ":SEARch:SERial:I2S Commands" on page 942
• ":SEARch:SERial:IIC Commands" on page 948
• ":SEARch:SERial:LIN Commands" on page 955
• ":SEARch:SERial:M1553 Commands" on page 961
• ":SEARch:SERial:SENT Commands" on page 965
• ":SEARch:SERial:SPI Commands" on page 970
• ":SEARch:SERial:UART Commands" on page 974