Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:CAN:DISPlay

728 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:CAN:DISPlay
(see page 1276)
Command Syntax
:SBUS<n>:CAN:DISPlay <type>
<type> ::= {HEXadecimal | SYMBolic}
The :SBUS<n>:CAN:DISPlay command specifies, when CAN symbolic data is
loaded into the oscilloscope, whether symbolic values (from the DBC file) or
hexadecimal values are displayed in the decode waveform and the Lister window.
Query Syntax
:SBUS<n>:CAN:DISPlay?
The :SBUS<n>:CAN:DISPlay? query returns the CAN decode display type.
Return Format
<type><NL>
<type> ::= {HEX | SYMB}
See Also • ":RECall:DBC[:STARt]" on page 660