Keysight Technologies InfiniiVision 3000T X Series - :FUNCtion<m>[:FFT]:VTYPe

382 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
18 :FUNCtion<m> Commands
:FUNCtion<m>[:FFT]:VTYPe
(see page 1276)
Command Syntax
:FUNCtion<m>[:FFT]:VTYPe <units>
<m> ::= 1 to (# math functions) in NR1 format
<units> ::= {DECibel | VRMS}
The :FUNCtion<m>[:FFT]:VTYPe command specifies FFT vertical units as DECibel
or VRMS.
Query Syntax
:FUNCtion<m>[:FFT]:VTYPe?
The :FUNCtion<m>[:FFT]:VTYPe? query returns the current FFT vertical units.
Return Format
<units><NL>
<units> ::= {DEC | VRMS}
See Also • "Introduction to :FUNCtion<m> Commands" on page 368
• ":FUNCtion<m>:OPERation" on page 390