:MTESt Commands 24
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 561
:MTESt:COUNt:RESet
(see page 1276)
Command Syntax
:MTESt:COUNt:RESet
The :MTESt:COUNt:RESet command resets the mask statistics.
See Also • "Introduction to :MTESt Commands" on page 551
• ":MTESt:COUNt:WAVeforms" on page 563
• ":MTESt:COUNt:FWAVeforms" on page 560
• ":MTESt:COUNt:TIME" on page 562