:SAVE Commands 28
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 683
:SAVE:RESults:[STARt]
(see page 1276)
Command Syntax
:SAVE:RESults:[STARt] [<file_spec>]
<file_name> ::= quoted ASCII string
The :SAVE:RESults:[STARt] command saves analysis results to a
comma-separated values (*.csv) file on a USB storage device.
Use the :SAVE:RESults:FORMat commands to specify the analysis types whose
results are saved to the file.
When multiple types of analysis results are selected, they are all saved to the same
file and separated by a blank line.
See Also • ":SAVE:RESults:FORMat:CURSor" on page 684
• ":SAVE:RESults:FORMat:MASK" on page 685
• ":SAVE:RESults:FORMat:MEASurement" on page 686
• ":SAVE:RESults:FORMat:SEARch" on page 687
• ":SAVE:RESults:FORMat:SEGMented" on page 688
To Next Page
Loading...
