Keysight Technologies InfiniiVision 3000T X Series

To Next Page

To Previous Page

1044 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide

33 :TRIGger Commands

:TRIGger:GLITch:RANGe

(see page 1276)

Command Syntax

:TRIGger:GLITch:RANGe <less_than_time>[suffix],

<greater_than_time>[suffix]

<less_than_time> ::= (15 ns - 10 seconds) in NR3 format

<greater_than_time> ::= (10 ns - 9.99 seconds) in NR3 format

[suffix] ::= {s | ms | us | ns | ps}

The :TRIGger:GLITch:RANGe command sets the pulse width duration for the

selected :TRIGger:GLITch:SOURce. You can enter the parameters in any order —

the smaller value becomes the <greater_than_time> and the larger value becomes

the <less_than_time>.

Query Syntax

:TRIGger:GLITch:RANGe?

The :TRIGger:GLITch:RANGe? query returns the pulse width duration time for

:TRIGger:GLITch:SOURce.

Return Format

<less_than_time>,<greater_than_time><NL>

See Also • "Introduction to :TRIGger Commands" on page 1007

• ":TRIGger:GLITch:SOURce" on page 1045

• ":TRIGger:GLITch:QUALifier" on page 1043

• ":TRIGger:MODE" on page 1016

Keysight Technologies InfiniiVision 3000T X Series - :TRIGger:GLITch:RANGe