34 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
1 What's New
Version 4.00 at Introduction
The Keysight InfiniiVision 3000T X-Series oscilloscopes were introduced with
version 4.00 of oscilloscope operating software.
The command set is most closely related to the InfiniiVision 4000 X-Series
oscilloscopes (and the 3000 X-Series, 7000A/B Series, 6000 Series, and
54620/54640 Series oscilloscopes before them). For more information, see
“Command Differences From 4000 X-Series Oscilloscopes" on page 35.