Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:SENT:TRIGger:FAST:DATA

:SBUS<n> Commands 29
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 843
:SBUS<n>:SENT:TRIGger:FAST:DATA
(see page 1276)
Command Syntax
:SBUS<n>:SENT:TRIGger:FAST:DATA <string>
<string> ::= "nnnn..." where n ::= {0|1|X}
<string> ::= "0xn..." where n ::= {0,..,9 | A,..,F | X | $}
The :SBUS<n>:SENT:TRIGger:FAST:DATA command specifies the status and data
nibbles that will be triggered on when the FCData trigger mode is chosen.
Query Syntax
:SBUS<n>:SENT:TRIGger:FAST:DATA?
The :SBUS<n>:SENT:TRIGger:FAST:DATA? query returns the fast channel data
trigger setting.
Return Format
<string><NL>
<string> ::= "nnnn..." where n ::= {0|1|X}
<string> ::= "0xn..." where n ::= {0,..,9 | A,..,F | X | $}
See Also • ":SBUS<n>:SENT:CLOCk" on page 820
• ":SBUS<n>:SENT:CRC" on page 821
• ":SBUS<n>:SENT:DISPlay" on page 822
• ":SBUS<n>:SENT:FORMat" on page 824
• ":SBUS<n>:SENT:IDLE" on page 826
• ":SBUS<n>:SENT:LENGth" on page 827
• ":SBUS<n>:SENT:PPULse" on page 828
• ":SBUS<n>:SENT:SIGNal<s>:DISPlay" on page 829
• ":SBUS<n>:SENT:SIGNal<s>:LENGth" on page 830
• ":SBUS<n>:SENT:SIGNal<s>:MULTiplier" on page 832
• ":SBUS<n>:SENT:SIGNal<s>:OFFSet" on page 833
• ":SBUS<n>:SENT:SIGNal<s>:ORDer" on page 834
• ":SBUS<n>:SENT:SIGNal<s>:STARt" on page 836
• ":SBUS<n>:SENT:SOURce" on page 838
• ":SBUS<n>:SENT:TOLerance" on page 840
• ":SBUS<n>:SENT:TRIGger" on page 841
• ":SBUS<n>:SENT:TRIGger:SLOW:DATA" on page 844
• ":SBUS<n>:SENT:TRIGger:SLOW:ID" on page 846
• ":SBUS<n>:SENT:TRIGger:SLOW:ILENgth" on page 848
• ":SBUS<n>:SENT:TRIGger:TOLerance" on page 849