Keysight Technologies InfiniiVision 3000T X Series User Manual

365
Keysight InfiniiVision 3000T X-Series Oscilloscopes
Programmer's Guide
18 :FUNCtion<m> Commands
Control functions in the measurement/storage module. See "Introduction to
:FUNCtion<m> Commands" on page 368.
Table 96 :FUNCtion<m> Commands Summary
Command Query Options and Query Returns
:FUNCtion<m>:AVERage:
COUNt <count> (see
page 370)
:FUNCtion<m>:AVERage:
COUNt? (see page 370)
<count> ::= an integer from 2 to
65536 in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:BUS:CLOC
k <source> (see
page 371)
:FUNCtion<m>:BUS:CLOC
k? (see page 371)
<source> ::= {CHANnel<n> |
DIGital<d>}
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:BUS:SLOP
e <slope> (see
page 372)
:FUNCtion<m>:BUS:SLOP
e? (see page 372)
<slope> ::= {NEGative | POSitive
| EITHer}
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:BUS:YINC
rement <value> (see
page 373)
:FUNCtion<m>:BUS:YINC
rement? (see page 373)
<value> ::= value per bus code,
in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:BUS:YORi
gin <value> (see
page 374)
:FUNCtion<m>:BUS:YORi
gin? (see page 374)
<value> ::= value at bus code =
0, in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:BUS:YUNi
ts <units> (see
page 375)
:FUNCtion<m>:BUS:YUNi
ts? (see page 375)
<units> ::= {VOLT | AMPere |
NONE}
<m> ::= 1 to (# math functions)
in NR1 format

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English