Keysight Technologies InfiniiVision 3000T X Series User Manual

844 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:SENT:TRIGger:SLOW:DATA
(see page 1276)
Command Syntax
:SBUS<n>:SENT:TRIGger:SLOW:DATA <data>
<data> ::= when ILENgth = SHORt, from -1 (don't care) to 65535, in NR1 f
ormat.
<data> ::= when ILENgth = LONG, from -1 (don't care) to 4095, in NR1 for
mat.
The :SBUS<n>:SENT:TRIGger:SLOW:DATA command specifies the data to trigger
on for the Slow Channel Message ID and Data trigger mode.
Query Syntax
:SBUS<n>:SENT:TRIGger:SLOW:DATA?
The :SBUS<n>:SENT:TRIGger:SLOW:DATA? query returns the data value setting
for the slow channel ID and data trigger.
Return Format
<data><NL>
<data> ::= when ILENgth = SHORt, from -1 (don't care) to 65535, in NR1 f
ormat.
<data> ::= when ILENgth = LONG, from -1 (don't care) to 4095, in NR1 for
mat.
See Also • ":SBUS<n>:SENT:CLOCk" on page 820
• ":SBUS<n>:SENT:CRC" on page 821
• ":SBUS<n>:SENT:DISPlay" on page 822
• ":SBUS<n>:SENT:FORMat" on page 824
• ":SBUS<n>:SENT:IDLE" on page 826
• ":SBUS<n>:SENT:LENGth" on page 827
• ":SBUS<n>:SENT:PPULse" on page 828
• ":SBUS<n>:SENT:SIGNal<s>:DISPlay" on page 829
• ":SBUS<n>:SENT:SIGNal<s>:LENGth" on page 830
• ":SBUS<n>:SENT:SIGNal<s>:MULTiplier" on page 832
• ":SBUS<n>:SENT:SIGNal<s>:OFFSet" on page 833
• ":SBUS<n>:SENT:SIGNal<s>:ORDer" on page 834
• ":SBUS<n>:SENT:SIGNal<s>:STARt" on page 836
• ":SBUS<n>:SENT:SOURce" on page 838
• ":SBUS<n>:SENT:TOLerance" on page 840
• ":SBUS<n>:SENT:TRIGger" on page 841
• ":SBUS<n>:SENT:TRIGger:FAST:DATA" on page 843
• ":SBUS<n>:SENT:TRIGger:SLOW:ID" on page 846

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English